发动机气门—门座磨损失效机理实验研究

对发动机气门－门座的磨损失效进行了模拟实验研究,基于现代微观表面测试技术和摩擦学原理对气门－门座的磨损机理进行了探讨。研究结果表明：气门－门座接触表面的磨损失效是由于反复的弹、塑变形疲劳,亚表层的金属滑动、基体材料在高温下的蠕变滑动和腐蚀磨损等所致,这种失效呈片状疲劳裂纹和剥落特征。     

电子膨胀阀对电动汽车空调系统的调节特性研究

电子膨胀阀是电动汽车空调系统的主要调控部件, 探究其调节特性对于制定系统控制策略具有重要意义. 本文搭建了以 R134a 为制冷剂的电动汽车空调系统实验台, 研究了电子膨胀阀调节过程中, 空调系统内制冷剂流量和压力的动态变化规律, 分析了不同压缩机转速下, 阀开度对系统制冷量、 空调箱出风温度、 压缩机功耗和系统COP 等性能参数的影响. 结果表明: 阀前制冷剂相态是影响电子膨胀阀调节时系统压力变化强弱的重要因素.在阀前制冷剂为过冷液态时, 调节阀开度对系统压力影响更大, 并且在阀前制冷剂具有较大过冷度( 大于10 ℃ )时, 下调阀开度会导致短时间的过节流造成系统压力大幅波动; 系统中制冷剂循环流量与阀开度呈线性变化趋势,不受阀前制冷剂相态的影响. 在实验工况下,100% 阀开度对应的制冷剂循环流量为97.2 ~115 .5 kg/h, 阀开度每下调10% , 系统中制冷剂循环流量下降6 % ~9 % .     

Lensless Fourier holography for digital holographic interferometry on biological samples

Digital holography as a tool for highly sensitive, interferometric non-destructive testing has several advantages compared to holographic measurements based on conventional storage media like an all-digital processing and a direct access to the phase of the object wave. Experimental results of interferometric investigations of heart valve bio-prostheses with a setup for lensless Fourier holography are presented which demonstrate that this technique is applicable to such biological samples with their wet and unstable surfaces. Limitations on size and resolution of the reconstructed object caused by the properties of the CCD sensor are discussed.     

多极板电流变阀应用于避震器之研究

以流动模式（flow mode)多极板之电流变阀（electrorheological valve)进行避震器阻尼力特性的研究。由于电极板的大小直接影响到流体流动的剪力及避雷器的阻尼力,因此使用多极板型式来探讨避震器的特性。设计有1－5个流道之并联及1－3个流道之串联多极板电流变阀的电流变避震器,并使用自制的电流变液进行实验。由研究结果显示,流动式并联极板之电流变避震器,一个流道之阻尼力最大,流道极板增加则阻尼力反而下降,而流动式串联多极板之电流变避震器之阻尼力则随极板数递增,故需要高阻尼力之避震器较适合使用串联多极板型式。     

Internal Flow Patterns on Heat Transfer Performance of a Closed-Loop Oscillating Heat Pipe with Check Valves

This article presents the experimental results of an evaluation of the influence of internal flow patterns on the heat transfer performance of a closed-loop oscillating heat pipe with check valves. It was found that the internal flow patterns could be classified according to four flow patterns: dispersed bubble flow, bubble flow, slug flow, and annular flow, respectively. The main regime of each flow pattern can be determined from a flow pattern map. The map can be used to predict the trend of the heat transfer rate in the closed-loop oscillating heat pipe with check valves.     

Fuzzy level control of a tank with optimum valve movement

This paper presents a fuzzy-based controller chip to control the level of a tank. A motor valve controls the tank level. The significant aim of this paper is to present a controller for minimizing the movement of the motor valve, at the same time, setting the level of the tank at defined points. The advantages of this type of control are to reduce both motor and input valve amortization and to increase their useful lifetime. On the other hand, simple and inexpensive elements are used in order to measure tank level and output flow. This is another advantage of the method. The controller is designed by fuzzy techniques in CMOS technology. The die size of the chip is .     

Sequential Injection Lab‐on‐Valve Procedure for the Determination of Amantadine Using Potentiometric Methods

Amantadine potentiometric detectors were developed, evaluated and incorporated in a SIA‐LOV manifold in order to accomplish the control of pharmaceutical formulations and urine. The electrodes incorporate α‐cyclodextrin as ionophore, dibutyl phthalate or 2‐fluorophenyl 2‐nitrophenyl ether as plasticizers and potassium tetrakis[3,5‐bis‐(trifluoromethyl)phenyl]borate (KTFPB) as cationic additive. The slope increased from 61.2 to 63.8 mV decade^?1 and the practical limit of detection from 2.6×10^?6 mol L^?1 to 2.5×10^?5 mol L^?1 when the plasticizer was changed from 2‐fluorophenyl 2‐nitrophenyl ether to dibutyl phthalate. When incorporated in the flow‐manifold the membranes composed by dibutyl phthalate or with 2‐fluorophenyl 2‐nitrophenyl ether presented slopes and a practical limit of detection of 69.8 mV decade^?1 and 1.5×10^?4 mol L^?1 or 73.7 mV decade^?1 and 5.4×10^?5 mol L^?1, respectively. The electrode presented stable responses for over a year, and were highly selective concerning the representative species of the two sample matrices assayed as interferents. Comparison of obtained results with those provided by reference methods and recovery assays, revealed adequate accuracy for control assays.     

短周期涡轮实验台快速阀设计计算及试验分析

本文介绍了短周期涡轮实验台关键设备之——快速阀的工作原理,建立了数学模型和计算方法,进行了设计性能计算。分别在大气和真空条件下对快速阀进行了调试和测量,并对计算和实验结果进行了分析。     

Announcements

Recent numerical investigations on pressure surges during pump trip in pumping installations showed that by including an air entrainment variable wave speed model, reasonable predictions of transient pressure surges with proper phasing and attenuation of pressure peaks can be obtained. These calculated results are consistent with similar field measurements made with the pumps operating at low pump cut-out levels, when air entrainment due to an attached surface vortex was observed. However, in the numerical calculation procedures it is assumed that the inertia of the moving elements of the check valve is small and that the check valve closes at zero reverse flow velocity. In practice, check valves seldom close precisely at zero reverse flow velocity. With the check valves not closing at zero reverse velocity, the present numerical computations show that the air content in a fluid system can adversely affect the check valve performance. With the fluid system operating within a critical range of air entrainment values, the present analysis showed that there is a possibility of ‘check valve slamming’ when the check valves are selected based only on the analysis of an air-free system. This phenomenon is confirmed through field observations.     

综述“维修线性流量阀时的内筒设计问题”

综述了竞赛中C题的完成情况与存在问题.